Showing posts with label cyclotron. Show all posts
Showing posts with label cyclotron. Show all posts

Tuesday, September 03, 2013

Proton Pack 2.0 Finish line is in sight!

Been a while since my last update but I've been busy working away. This is the point where it takes a lot longer because I'm working on a much smaller scale. It's fairly easy to get the main parts created and fitting together, but come time to wire...it's a headache.  What follow are pictures from the past few weeks moving oh so close to the final product. At the time of writing this I'm actually only left with creating a stand for the pack.

My friend who this is for has requested a black one and I'm hoping I can improve on the hastily put together stand I made for the original one I made.

So here we have the bumper being created. This is always one of the harder pieces because before there are layers of primer and filler and paint...it's pretty fragile. Here you can see it's basic shape coming togther

Let there be light! The power cell is lit and glowing and looks amazing. Successful test indeed.

This is a quick test to see if the barrel of the gun will light up with the LED. It's basically like a huge fiber optic. I'm using a cell battery for it's unique ability to illuminate a single LED without the need of a resistor.  It works, trust me. The flash is just causing too much light to see the glow.

Successful test of the cyclotron lights!

This initial wiring had to be taken a part and redone as lighting LED's can be tricky if you're not paying attention. And I was clearly not paying attention during round one. When I tried to hook up the gun, it wouldn't light up. Remember, different color LED's do not play well with each other when on the same circuit. 
Lesson Learned

The Ion bar and it's mount. Just sitting around saying, yeah, I'm done. 

Yup...Hermione. Don't judge.  Some of the labels are being applied to the main body.  This has been requested to be Ray's pack from the original Ghostbusters.  There aren't too many differences. His HGA is straight up and down as opposed to Egon's which is at an angle. And you can see in this pic that the label is correct. The bolts will be painted on accordingly as well. 

The gun coming together. Adding a few little cosmetic details. I love that half the wires on this model are functional and the other half do nothing. I'm assuming the original prop was the same way.

It's officially all together! I use tape to clamp things together when drying. Rubber bands or actual clamps would damage the pieces. Tape is harmless but applies enough pressure.I believe in this pic the mount for the red and blue hoses on the left side is slowly drying.

HANDLES! There is so much wear and tear on these that when making them I tried to keep them a little rough. There is some red coming through from underneath to mimic the actual screen grabs and prop images that show them as such. It's a simple thing to do. Use a base primer of red and then just lightly sand off the final coat until you get some bleed through.

Shock mount...pre-paint. Ray's is actually bent in some scenes and normal in others. There is so much discrepancy between the hero packs and the foam stunt packs that I chose to make this normal. 

Almost done!You can get an idea of scale too in this pic. As this was taken, the ribbon cable was being heated up in order to make it more malleable so I can attach it. But this is a great shot of the almost done pack! All electronics work by a switch in the back. Along with the battery housing (bit of a tight squeeze, but what ever) And almost all detailing is done.


More to come...

Wednesday, July 03, 2013

First Commissioned Proton Pack

Well folks, it's happened. I've been contacted by another HUGE Ghostbusters fan (and specifically a fan of the heart of the Ghostbusters, Ray Stanz himself) to create another miniature proton pack. My very first commissioned pack.  I've had offers but it's been more the type of "hey make me one." While this is truly a labor of love, it's a labor. As you can tell from the original build. They take a while, but the end product is something I'm very very proud of. And this time around I hope to improve on a few little tiny issues I had when making the first one.

So here is the build of version 2.0

First up the motherboard. I chose to cut this out of a sheet of plastic this time around to give the pack even more stability and to make it easier to create a cover for the batteries.  We'll see how that works out when we get to that step.  In the original pack there was a planned cover with fell to pieces in my hand. So this should fix the brittleness of wood.  One hopes.



Here is the cyclotron and possibly the biggest piece of the pack. It's made of several layers of wood in order to build it up high enough and allow me to fully carve out in the inside to make room for the electronics.


This is just a rough fit to see how spacing is lining up before priming and sanding. So far so good. Looks a big plain but that'll change soon enough.



This is after the first coat of primer and a little filler. I use Primer and gesso to fill in the wood. It helps to strengthen it and gives a nice base for the pain to stick to. Only down side of gesso is that I feel like halfway through each can it's such a thick substance that no more is willing to come out.  Anyone else use this and find they have this problem?




A couple close ups of the cover to the cyclotron in it's primed and filled stage.  Right before another coat of primer was shot onto it.




After a few more coats of primer and here is a side by side comparison to help me make sure I'm on the right track. I like to use different colors of primer to hilight sections and to help me see what needs to be done. Using one color tends make everything blend together.


And here is an un-primed gun mount box prior to detailing. There is some detailing that needs to be done to the top now that the basic shape is there and the edges have been rounded.





And that's where we are so far folks. It might not seem like a lot, but it is. There is so much sanding and cutting and priming and waiting for each section. And that gets repeated over and over again. More coming soon.  But this is an excellent start to another pack.

Monday, December 19, 2011

Miniature Proton Pack 2

I know I have a few projects up in the air, including the Millennium Falcon.  Which is really just a good weekend away from being done. But it's been over a year since I started working on the miniature proton pack.  Even longer since I first thought about it.  So this past week I put in a concentrated effort to make some headway into this project.

This is going to be mostly a picture post, but it'll show my progress.  For some specifics, i'm carving the main pieces out of balsa wood and will eventually coat with a thin plaster to make a mold out of.  The goal is to illuminate it with tine LEDs.  Specifically inside the Cyclotron and the Wand.

carving out the layers that will make up the cyclotron

Behold the mother board!

The Synchronous Generator

with Cyclotron and Clippard for spacing

The cut out for the lights to be placed in



Here is the crank generator painfully carved.  

And for now, the pieces loosely assembled to give you an idea of what it will look like.

I've clearly made some progress.  I still have some carving and actual creation of the booster and frame, the power cell (which I would like to light up as well, but might prove to be just too small) and the ion bar.  But you can get an idea of how it's going.  Once all the basic pieces are there I'll begin doing some real detail work, sand down some rough edges with very fine sand paper and begin to fully assemble.  The wand is going to be tricky due to its configuration.  I might forgo the usual mounting bracket for a magnet in order to save space and for durability's sake.