Showing posts with label hollywood. Show all posts
Showing posts with label hollywood. Show all posts

Tuesday, September 03, 2013

Proton Pack 2.0 Finish line is in sight!

Been a while since my last update but I've been busy working away. This is the point where it takes a lot longer because I'm working on a much smaller scale. It's fairly easy to get the main parts created and fitting together, but come time to wire...it's a headache.  What follow are pictures from the past few weeks moving oh so close to the final product. At the time of writing this I'm actually only left with creating a stand for the pack.

My friend who this is for has requested a black one and I'm hoping I can improve on the hastily put together stand I made for the original one I made.

So here we have the bumper being created. This is always one of the harder pieces because before there are layers of primer and filler and paint...it's pretty fragile. Here you can see it's basic shape coming togther

Let there be light! The power cell is lit and glowing and looks amazing. Successful test indeed.

This is a quick test to see if the barrel of the gun will light up with the LED. It's basically like a huge fiber optic. I'm using a cell battery for it's unique ability to illuminate a single LED without the need of a resistor.  It works, trust me. The flash is just causing too much light to see the glow.

Successful test of the cyclotron lights!

This initial wiring had to be taken a part and redone as lighting LED's can be tricky if you're not paying attention. And I was clearly not paying attention during round one. When I tried to hook up the gun, it wouldn't light up. Remember, different color LED's do not play well with each other when on the same circuit. 
Lesson Learned

The Ion bar and it's mount. Just sitting around saying, yeah, I'm done. 

Yup...Hermione. Don't judge.  Some of the labels are being applied to the main body.  This has been requested to be Ray's pack from the original Ghostbusters.  There aren't too many differences. His HGA is straight up and down as opposed to Egon's which is at an angle. And you can see in this pic that the label is correct. The bolts will be painted on accordingly as well. 

The gun coming together. Adding a few little cosmetic details. I love that half the wires on this model are functional and the other half do nothing. I'm assuming the original prop was the same way.

It's officially all together! I use tape to clamp things together when drying. Rubber bands or actual clamps would damage the pieces. Tape is harmless but applies enough pressure.I believe in this pic the mount for the red and blue hoses on the left side is slowly drying.

HANDLES! There is so much wear and tear on these that when making them I tried to keep them a little rough. There is some red coming through from underneath to mimic the actual screen grabs and prop images that show them as such. It's a simple thing to do. Use a base primer of red and then just lightly sand off the final coat until you get some bleed through.

Shock mount...pre-paint. Ray's is actually bent in some scenes and normal in others. There is so much discrepancy between the hero packs and the foam stunt packs that I chose to make this normal. 

Almost done!You can get an idea of scale too in this pic. As this was taken, the ribbon cable was being heated up in order to make it more malleable so I can attach it. But this is a great shot of the almost done pack! All electronics work by a switch in the back. Along with the battery housing (bit of a tight squeeze, but what ever) And almost all detailing is done.


More to come...

Tuesday, November 13, 2012

Flux Capacitor Part 1

Ladies and Gentlemen!

I've mentioned it, or hinted at it. Something. But now I'm actually taking on the challenge of building a mini Flux Capacitor. I mean who wouldn't want one of those just sitting there on their desk? You never know when you're going to need one. So I'm taking it upon myself to flood the world (or my desk) with the power of the the Delorean.

Reference photos have actually been difficult to find. Not because they're scarce, but because there are so many. They Flux Capacitor (from here on known as "FC") changed a little in each film and then of course again in all the replicas being built both privately and licensed.

But here is a pretty good photo just to get some basic ideas from:

This is one of the do it yourself kind. Love this kind! Doc Brown wouldn't have it any other way.

Now begins my attempt at making a smaller version of this amazing piece of technology.

Dimensions were taking from the actual electrical box that it's housed in and just shrunk down. As far as my projects go, this one is the easiest to get measurements for because the things actually exist.

Pretty straight forward rectangle with sides ready to be assembled




I cut out the viewing port and will eventually cover this with a thin piece of plastic. 


There are no innards yet.  There is no nothing yet. Just a frame. A weird picture frame.

PRIMER!

For now this is it. As of posting these pictures I've moved on to step two which is to the the actually working pieces of the FL lit and properly aligned.  If I can I'll try to get some pics ready for upload tomorrow just so you can all see the magic of the light. oooh. Ahhh.

I know there isn't much here, but it's a start. It's very boxy. Once the FL has more structure I can start to round out the corners. While it is an electric box, it's not a perfect rectangle. That baby's got curves!


Monday, December 19, 2011

Miniature Proton Pack 2

I know I have a few projects up in the air, including the Millennium Falcon.  Which is really just a good weekend away from being done. But it's been over a year since I started working on the miniature proton pack.  Even longer since I first thought about it.  So this past week I put in a concentrated effort to make some headway into this project.

This is going to be mostly a picture post, but it'll show my progress.  For some specifics, i'm carving the main pieces out of balsa wood and will eventually coat with a thin plaster to make a mold out of.  The goal is to illuminate it with tine LEDs.  Specifically inside the Cyclotron and the Wand.

carving out the layers that will make up the cyclotron

Behold the mother board!

The Synchronous Generator

with Cyclotron and Clippard for spacing

The cut out for the lights to be placed in



Here is the crank generator painfully carved.  

And for now, the pieces loosely assembled to give you an idea of what it will look like.

I've clearly made some progress.  I still have some carving and actual creation of the booster and frame, the power cell (which I would like to light up as well, but might prove to be just too small) and the ion bar.  But you can get an idea of how it's going.  Once all the basic pieces are there I'll begin doing some real detail work, sand down some rough edges with very fine sand paper and begin to fully assemble.  The wand is going to be tricky due to its configuration.  I might forgo the usual mounting bracket for a magnet in order to save space and for durability's sake.